How to Assemble Inflatable Boat with High Pressure Air Floor

STEP 1 : Unfold the deflated boat

Clear a flat space (making sure it is clean and free of sharp objects that could damage inflatable boat) and unfold your boat. Remove the hull from its box (or storage bag) . Unroll the hull of the inflatable boat so it laid out flat.


STEP 2 : Inflate boat air chamber to 30% and unroll air floor

Push and twist all valves one quarter to the closed position. The Inflatable Boats can be inflated either with a foot pump or with electric pump. Inflate all main chambers to approximately 30%-50% full. Unroll high pressure air floor into the boat.Floor has plywood support board which will push keel down and create V shape on the boattom of the boat.Be sure not to trap the tubes under plywood support board.

STEP 3 : Make sure that keel valve is located at the center of the floor hole

Install bench seat(s).


STEP 4 : Inflate main air chambers

Inflate main air chambers. Do not inflate one air chamber at a time. When inflating or deflation pantoons , maintain a balanced air pressure between chambers in order to prevent potential damage of the pvc wall inside of the chambers that separate the air chambers.


Read entire article on http://goo.gl/Dn7Dpc

For more information Contact us at :

Navnit Marine Private Limited
Navnit House, 
Gokul Nagar, 
Mumbai Agra Road, Thane (W), 400601
Mumbai, India
Tel: (+91) 22 6677 6659 
Service : (+91) 22 2723 1555 
Mobile : (+91) 9773377555
E-mail: info@navnitmarine.com